Puracon Mobil M200 / M300 is used for manual humidity monitoring during filling procedures or to check the equipment before diving. The humidity value can be controlled during the entire filling procedure. Exceeding of the limits will be indicated by a red LED.

The Puracon Mobil M200 / M300 can be connected directly between cylinder and filling hose (no installation work on the compressor required).

Pressure Ranges:
M200: 150 to 250 bar
M300: 250 to 350 bar.

  • Auto shut down (battery saving mode)
  • Pressure compensation
  • Higher accuracy by new temperature compensation
  • Applicable without installation work on the compressor
  • Storage of max. humidity value
  • Alarm LED - freely adjustable limit
  • Maintenance free
  • Calibration free
  • Humidity checks of filled tanks possible
Technical Data
Puracon Mobil M 200 M 300
Operating pressure: 150 to 250 bar 250 to 350 bar
Power supply: 2 x AAA LR03 alk. battery 2 x AAA LR03 alk. battery
Connector: Standard G5/8 Standard G5/8
Protection rating: IP64 IP64
Operating temperature: +5°C to +45°C +5°C to +45°C
Dimensions: 60 x 90 x 40 mm 60 x 90 x 40 mm